您現在的位置: 首頁» 新聞資訊 >> 升降平臺廠家告訴你濟南升降平臺中電氣系統標準有哪些?
升降平臺廠家告訴你濟南升降平臺中電氣系統標準有哪些?
升降平臺廠家提醒,電氣系統是濟南升降平臺重要的指揮系統,是完成各項作業的重要前提,為了保障高空作業的安全,對其規定標準是很有必要的,到底有哪些內容,小編給大家講述一下。The lifting platform manufacturers to remind, the electric system is an important platform for lifting command system in Ji'nan, is an important prerequisite to complete the operation, in order to protect the aerial work safety, it is very necessary to set standards, what content, small to give you about.
1.升降平臺廠家認為,電氣系統應滿足JG/T5100-1998以及JB/T922的規定。Lifting platform manufacturers believe that the electrical system should meet the requirements of JG/T5100-1998 and JB/T922.
2.濟南升降平臺電器設備應具有防水、防塵和防震措施,元件排列必須整齊,連接必須牢固。Ji'nan lifting platform electrical equipment should have waterproof, dust and anti shock measures, components must be neatly arranged, the connection must be firm.
3.非導線金屬都應可靠接地,導線需要穿管時,應采取防護措施,并且要符合建筑行業安裝規范。Non conductor metal should be reliable grounding, the conductor needs to wear pipe, should take protective measures, and to meet the construction industry installation specifications.
4.電氣控制系統應采取安全電壓或采取可靠防觸電的措施,確保升降臺操作人員人身安全。Electrical control system should adopt safe voltage or take reliable measures to prevent electric shock, to ensure the safety of the operator.
5.升降平臺廠家提醒,電氣系統內電氣元件性能應滿足國標GB1497的相關規定,主要元器件絕緣電阻不能小于1MΩ,二次回路對地絕緣大于2 MΩ。Lifting platform manufacturers to remind, electrical components within the electrical system performance should meet the relevant provisions of the national standard GB1497, the main components of the insulation resistance can not be less than 1M, the two circuit to ground insulation greater than 2 M.
6.系統應具有安全保護裝置,在整機啟動線路中,必須安裝總開關,在系統出現故障時,能切斷故障電流。系統必須可靠接地,接地電阻值應小于4歐姆。The system should have the safety protection device, in the whole starting line, the total switch must be installed, when the system fails, it can cut off the fault current. System must be reliable grounding, grounding resistance value should be less than 4 ohm.
7.電動機是濟南升降平臺的動力所在,它應該滿足國家現行標準,產品必須經過3c認證。Motor is the driving force of Ji'nan lift platform, it should meet the current national standards, the product must be certified by 3C.
8.升降平臺廠家提醒,電氣系統的元件未經許可嚴禁出廠。Lifting platform manufacturers to remind the electrical system components without permission is strictly prohibited ex factory.
綜上所述:濟南升降平臺電氣系統是經過層層把關的,設備是一個統一的整體,不允許有劣質原件的存在,電氣系統的正常運行也是保證濟南升降機效率和保證安全的重要舉措,因此不可小視。To sum up: Ji'nan lifting platform electrical system after Cengcengbaguan, equipment is a unified whole, does not allow the existence of poor quality originals, the normal operation of the electrical system is to ensure the safety of the Ji'nan elevator efficiency and an important measure to ensure, therefore can not be ignored.

手 機:189-0831-8192
電 話:138-5315-0728
郵 箱:jnhetai@163.com
地 址:重慶永川高新開發區和順大道806號